Bantam e-STATION BC6-10 Power Max Charger

Price £129.99

 
Specification:
Operating Voltage: DC 11-18 volts
Charge/Discharge Power: Max. 200/25 Watts
NiCd/MH: 1-18 Cells
Lilo/LiPo/LiFe: 1-6 Series
Pb: 2-24 Volts
Charge Current: 0.1 to 10.0A
Discharge Current: 0.1 to 5.0A
No. of Cycles: 1 to 5 times
Battery Data Memory: Up to 10 data
Weight: 960g
Dimensions: 160x120x40 mm

The e-STATION BC6-10 charger gives you a rapid charger/discharger with integrated balancing circuit, which is computerised with a high performance microprocessor and specialised operating software. It can maintain your battery at its best condition and also control them safely.

User's Setting-Up Parameters:
Lithium Battery Voltage Type:
LiLo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak Voltage Sensitivity:
5 to 20mV
NiMH Delta-peak voltage Sensitivity:
5 to 20mV
Battery temperature cut-off:
20 to 80C or OFF
Waste time between charge/discharge:
1 to 60 min.
Integral timer limit for safety:
10 to 720 min.or OFF
Maximum charging capacity limit for safety:
10 to 9990mAh or OFF
Key beep and buzzer sound:
ON/OFF
Input DC power low alert:
10 to 11V

Operating software - Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

High-power and high-performance circuit - BC6-10 employs the circuit that has maximum output power of 200Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.

Individual voltage balancer for Lithium batteries inside - BC6-10 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

PC based analysis using USB communication - For technical expert, BC6-10 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

PDF Instruction Manual Download