Bantam e-STATION BC8DX Charger

Price £289.95

 
Specification:  
Operating Voltage: DC 11-18 volts    
Idling Current: approx. 100mA    
Charge/Discharge Power: Max. 160/25 Watts    
NiCd/MH: 1-22 Cells    
Lilo/LiPo/LiFe: 1-8 Series    
Pb: 2-28 Volts    
Charge Current: 0.1 to 9.0A    
Discharge Current: 0.1 to 5.0A    
No. of Cycles: Up to 10 times    
Battery Data Memory: Up to 5 data    
Weight: 1100g    
Dimensions: 200x150x55 mm    

Bantam e-STATION BC8DX Charger

The Bantam e-STATION BC8DX has two identical and independent outputs with integrated balancer. It has a charge current up to 9A, discharge current of up to 5A, 1 to 8 series of Lilo/LiPo/LiFe, 1 to 22 cells of NiCd/NiMh, 2 to 28V of Lead Acid (Pb) at each output.

User's Setting-Up Parameters:
Lithium Battery Voltage Type:
LiLo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak Voltage Sensitivity:
disable, delicate, 5 to 20mV adjustable
NiMH Delta-peak voltage Sensitivity:
disable, delicate, 5 to 20mV adjustable
Battery temperature cut-off:
20 to 80C or OFF
Waste time between charge/discharge:
1 to 60 min.
Trickle Charge Mode:
ON/OFF, 50 to 300mA.
Integral timer limit for safety:
10 to 1380 min.or OFF
Maximum charging capacity limit for safety:
50 to 120%
Key beep and buzzer sound:
ON/OFF, melody selectable
Input power low alert:
10 to 11V

Optimised Operating Software - The operating program in this charger is executed with mutual links and communications with every components to prevent any possible error, so it introduces the maximum safety. Especially, the charging algorithm is so multifarious that you can select the best program to suit your requirement. And BC8DX has a large LCD for showing various information's including charge/discharge graphs during the process.

High-power and high-performance circuit - BC8DX employs the circuit that features two totally independent but identical high-power outputs which are powered as much as 160watts each. As a result, it can charge or discharge up to 44 cells of NiCd/NiMH or 16 series of Lithium batteries simultaneously. Furthermore, the twin-fan cooling system is so efficient that can hold such a power without any trouble of running the circuit.

Dual Individual Voltage Balancer for Lithium Batteries Inside - BC8DX has individual cell voltage balancers at both outputs. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

Balance Individual Cells on Discharge - BC8DX also can monitor and balance individual cells of the Lithium battery pack during the discharge process as well as ‘FAST’ and ‘STORAGE’ mode. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

Cyclic Charging/Discharging - Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing at both outputs.

CHARGE LEADS