HOME

 

 EDF Performance Brushless Motors, Fans Micro Servos...

1:1 power/weight ratio with vertical climbs - ballistic or slow!   83mph recorded on Airspeed stand alone unit. Thanks Nyle from MC...

* As Used On this model.

 

 

Items Marked * Suit Ducted Fan Models with an all up weight 1kg with a 1:1 power to weight Performance!
ie. As a guide EDF Model bare weight 450-500 gms + x4 9g servos + 70mm fan unit + 60 ECU +  4s battery. (Tot. 1kg)

* See Also Matching EDF Kits...

* SeeVideo sent in of - EDF Fan Unit - Static Thrust Demo as used in  A7 Corsair Above - All up wt. 900gms - Thrust 900gms 1:1 power/wt. ratio courtesy Godsy.  Thanks from MC...

 

Motor Typhoon EDF 2w-20 Brushless Inrunner*
 

Suitable for EDF (70mm fans) Models ≤ 1000g on 3s and turbo charge on 4s.

  • HET EDF unit 6904 or WeMoTec 480 mini fan
  • Voltage: 8.4 - 15.6
  • Diameter : 28 mm
  • Length : 43 mm
  • Shaft Dia. : 3.17 mm
  • Weight : 89 grams
  • No of winds: 2
  • KV : 3350
  • Max Current: 60 A
  • Max efficiency: 80%
  • Power Nominal: 700 Watts
  • Model Type: EDF Jets : Pylon
  • Recommended Prop Size: Mini Fan 480, HET 4 6904: 4.7 x 4.7 cam prop
  • Recommended ESC 60 - 80 Amp

top

 

 

£59.99

 

 

 

Motor Typhoon EDF 2w-20

*

Match with Ducted Fan - Hawk Kits

 
Motor Typhoon EDF 2w-20

Pic shows 2w -20 (only length different - 48mm)


 

Motor Typhoon EDF 2w-25 Brushless Inrunner (Supercharge your EDF)

Typhoon EDF-2W-20 900W motor for 70mm fans-

Suitable for EDF Models ≤ 1600g on 4-6s Lipos with min 60A discharge for best performance.

  • Voltage: 8.4 - 22.2
  • Diameter : 28 mm
  • Length : 48 mm
  • Shaft Dia. : 3.17 mm
  • Weight : 110 grams
  • No of winds: 3
  • KV : 1700
  • Max Current: 50 A
  • Max efficiency: 87%
  • Power Nominal: 900 Watts
  • Model Type: EDF Jets : Pylon
  • Recommended Prop Size: Mini Fan 480, Het 6904 : APC E4.7 x 4.7
  • Recommended ESC 60 - 80 Amp

top

 

£0.00

 

 

Out of Stock

Tornado Revolution BM 400 - 5100- Inrunner Brushless Motor - 450watt

When you get it wrong this is what happens!-      Always stick to the values quoted.

  

 

 

Fitted to a  4 blade 6904 pulled 1000watts and put out a lovely plume of smoke from tail pipe when flying -  everyone wanted one (including me!) too much load should of been a 3 blade only.  Thanks John .


Tornado Revolution BM 400 -KV 5100 - Inrunner Brushless Motor - 450watt


Suitable for EDF Models ≤ 1000g on 2s-4s Lipos.

  • Tornado Revolution BM 400
  • 450 watts
  • 45A
  • Direction R & L
  • In runner Motor
  • L49mm x 28mm dia.
  • axle length 12mm
  • shaft dia. 3.2mm
  • 6 winds
  • kv 5100
  • weight 65gm
  • Rec. ECU 45 - 60 amp
  • Suitable for HET 3 blade mini fan.

top

 

£24.99

 

Out of Stock

*


Tornado XQ XP-60A Programmable Brushless ESC*

  • Tornado XQ XP-60A Brushless ESC
  • 2 - 6 Lipo's / 6- 18 Nixx
  • DC 5.5v - 26v
  • BEC 3A / 5.5V
  • Full protection features-
  • Low Voltage 
  • Signal Loss.
  • Programmable from Transmitter / Program card digital, (below.)

top

 

£54.99

 

 

Pic. Shows 60A (80A same difference)


 

Tornado Gold XQ XP - 80A Programmable Brushless ESC

 

  • Tornado XQ XP-80A  Brushless ESC
  • 2 - 5 Lipo's
  • BEC 3A / 5.5V
  • Full protection feature:
  • Low voltage
  • Signal Loss.
  • Programmable from Transmitter / Program card digital (below.)

top

 

£69.99

 

 

*


Tornado XQ Range - LED Program Card.*

  • Clear LED Display
  • 16 Different Program options, program on the fly.
  • Easily and accurately program on the fly.

 

top

 

£17.99

 

 

SeeVideo sent in of - EDF Fan Unit - Static Thrust Demo as used in  A7 Corsair Above - All up wt. 900gms - Thrust 900gms 1:1 power/wt. ratio.

 

HET 4 blade Fan Unit 6904*

  • Recommended by us as the best 70mm fan unit available
  • Carbon Filled Plastic, Aluminum
  • Outside Diameter: 72mm
  • Inside Diameter: 69mm
  • Weight: 56 grams - 68 grams (with cooling ring)
  •  Rotor: 4 bladed (68mm) dynamically balanced
  •  Fits into a Wemotec mini fan space
  • Comes complete with tools and instructions 

For use with brushless motor like the HET 2W, 2W-20, 2W-23, 2w-25 or equivalent.

top

 

 

£29.99

 

 

 

HET 4 blade Fan Unit -  Ref 6904

*

Match with Ducted Fan - Hawk Kits

 
 

Lander LEDF68-1AP 68mm Electric Ducted Fan with 3575Kv Motor

68mm Metal fan unit complete with 4S 3575Kv motor

 

***************************

Lander 90-1A 16 New Updated 90mm

Metal EDF Unit Complete with 6s 1660kv.

 

top

 

 

 

£84.99

 

 

 

£144.99

Lander fan & Motor

 

HET 3 blade Mini Fan Unit
 

HET 3 blade Mini Fan Unit
 

  • HET 3 blade
  • Mini Fan Unit
  • 400-480 mot 3.2mm shaft.
  • Ideal with  BM 400 -KV 5100
top
 

£14.99

Out of Stock

 

  Servo Blue Bird Ultra BMS-371 9g servo


Blue Bird 373BB Servo 9.6gms 4.8v-6v*

         

  • Length 24mm
  • Width 11mm
  • Height 24mm
  • Weight 8gm
  • 0.12sec/60 deg (without load)
  • Weight 9.6gms/0.38oz
  • Torque 1.6kg/cm - 22oz/in
  • Fittings Included

top

 

Price: £18.75

 

 

SOLD OUT

*
As above style.

*


*

Our Specials -

Micro Servo 9g 4.8v-6v 

  •  Length 22mm
  • Width 10mm
  • Height 24mm
  • Torque 1.6kg/cm - 22oz/in
  • Fittings included

top

 

Price: £10.99

 

 

SOLD OUT


Tornado UBEC 4.8v or 6v switchable

Top Quality - Tornado Ultimate BEC is an external circuit that taps power from your battery pack and regulates the voltage to the necessary 4.8 or 6 volts to power your receiver and servos. It does not replace the speed control. However, it replaces the BEC function in a speed control with much more capabilities. It can handle up to a 2 - 5S Lipo, 5 - 15 cell NiCad/Nimh. It can power up to 8 servos (3-5 amps)

top

 

Price: £14.99

 

The above video test & flight with A7 Corsair performed with this battery..

 Tornado Professional Lipo 4S 25c 2500mah*

Performance models, jets, helicopters.

Takes the A7 Corsair pictured above with vertical climbs. Gives approx. 7 minutes flight time (depends on your flight style ie. not full throttle for 7 minutes!) with the ECU cut off set to 12v under load to 50% power. Excellent performance from a 4S..

 

top

 

Price: £60.98

 

*

*


* Gold Connectors

Gold Connectors 3.5mm gold plated bullet connectors.

 

top

 

Price: £2.99

 

*

*Heat Shrink

Approx 28 pcs. in lengths of 8cm  assorted diameter heat shrink.

 

 

Price: £4.99